secubox-openwrt/package/secubox/luci-app-network-modes

LuCI Network Modes Dashboard

Version: 0.3.6 Last Updated: 2025-12-28 Status: Active

Configure your OpenWrt router for different network operation modes with a modern, intuitive interface.

🎯 Network Modes

🚀 What's New in v0.3.6

• WireGuard automation: generate key pairs, deploy wg0 interfaces, and push MTU/MSS/BBR optimizations directly from the Relay panel.
• Optimization RPCs: new backend methods expose MTU clamping, TCP BBR, and WireGuard deployment to both UI and automation agents.
• UI action buttons: Relay mode now includes one-click buttons for key generation, interface deployment, and optimization runs.
• Integrated proxies: router mode now auto-configures Squid/TinyProxy/Privoxy, transparent HTTP redirection, DNS-over-HTTPS, and nginx reverse proxy vhosts with optional Let’s Encrypt certificates.

🔍 Sniffer Bridge Mode (Inline / Passthrough)

Transparent Ethernet bridge without IP address for in-line traffic analysis. All traffic passes through the device.

Network Configuration:

• Transparent bridge mode (br-lan) without IP address assignment
• Promiscuous mode enabled on all bridged interfaces
• No DHCP server - invisible on the network
• No routing - pure layer 2 forwarding
• Inline deployment - device inserted in traffic path
• Perfect insertion point between gateway and network devices

Traffic Analysis Features:

• Netifyd integration for real-time Deep Packet Inspection (DPI)
• Application detection (Netflix, YouTube, Zoom, torrent, etc.)
• Protocol identification (HTTP/HTTPS, DNS, QUIC, SSH, etc.)
• Flow tracking with source/destination analysis
• Bandwidth monitoring per application and protocol

Use Cases:

• 📊 Network forensics - Capture all traffic passing through
• 🔍 Security monitoring - Detect anomalies and threats inline
• 🎯 Bandwidth analysis - Identify bandwidth hogs
• 🧪 Protocol debugging - Debug network issues
• 📈 Compliance monitoring - Log all network activity

Physical Setup (Inline):

Internet Router (Gateway)
        ↓
   [WAN Port] OpenWrt (Bridge Mode) [LAN Ports]
        ↓
   Network Devices (Switches, APs, Clients)

Advantages:

• ✅ Sees 100% of network traffic
• ✅ Can apply firewall rules if needed
• ✅ Can perform traffic shaping
• ⚠️ Single point of failure (if device fails, network is down)

Proxy / DoH Requirements (Router Mode):

Capability	Packages
Caching proxy	squid or tinyproxy or privoxy
Transparent proxy redirect	(iptables built-in)
DNS over HTTPS	https-dns-proxy, ca-certificates
HTTPS reverse proxy	nginx (HAProxy/Caddy support planned)
Let’s Encrypt automation	acme, acme-dnsapi, openssl-util

Install these packages before enabling the associated toggles in the Router panel so the automation can write configs and restart services successfully.

---

👁️ Sniffer Passive Mode (Out-of-band / Monitor Only)

Pure passive monitoring without affecting network traffic. Device only listens, traffic doesn't flow through it.

Network Configuration:

• Monitor mode interface (no bridge, no forwarding)
• Promiscuous mode for packet capture
• No IP address on monitoring interface
• Read-only - cannot affect network traffic
• Connected via SPAN/mirror port or network TAP

Traffic Analysis Features:

• Netifyd integration for Deep Packet Inspection
• Full packet capture with tcpdump/Wireshark
• Application and protocol detection
• Flow analysis and bandwidth monitoring
• Zero network impact - invisible to network

Use Cases:

• 🔬 Pure forensics - Monitor without any network impact
• 🛡️ IDS/IPS - Intrusion detection without inline risk
• 📡 Network TAP monitoring - Dedicated monitoring infrastructure
• 🔒 Secure environments - No risk of disrupting production traffic
• 📊 Long-term monitoring - Continuous passive observation

Physical Setup Options:

Option 1: Switch SPAN/Mirror Port

Internet Router
        ↓
   Managed Switch (with port mirroring)
        ├─→ [Port 1-23] Normal traffic
        └─→ [Port 24 SPAN] ──→ OpenWrt [eth0] (Monitor)

Option 2: Network TAP

Internet Router ──→ [TAP Device] ──→ Switch
                        ↓
                   OpenWrt [eth0] (Monitor)

Option 3: Hub (Legacy)

Internet Router ──→ [Hub] ──→ Switch
                      ↓
                 OpenWrt [eth0] (Monitor)

Advantages:

• ✅ Zero network impact - no single point of failure
• ✅ Completely invisible to network
• ✅ Cannot be detected or attacked
• ✅ Perfect for compliance and security monitoring
• ⚠️ Requires SPAN port, TAP, or hub
• ⚠️ May miss traffic depending on setup

Integration with SecuBox: Both modes work seamlessly with:

• Netifyd Dashboard for DPI visualization
• CrowdSec for threat detection
• Netdata for metrics and graphs
• Client Guardian for access control decisions

Advanced Options:

• Capture to PCAP files for offline analysis
• Export to SIEM (Elasticsearch, Splunk, etc.)
• Filter specific protocols or ports
• Traffic replay for testing
• Long-term packet storage on USB/NAS

📶 Access Point Mode

WiFi access point with advanced optimizations.

• 802.11r Fast BSS Transition (roaming)
• 802.11k Radio Resource Management
• 802.11v BSS Transition Management
• Band Steering (prefer 5GHz)
• Beamforming support
• Channel and TX power configuration

🔄 Relay / Extender Mode

Network relay with WireGuard optimization.

• Relayd bridge for network extension
• WireGuard VPN integration
• MTU optimization for tunnels
• MSS clamping for TCP
• TCP BBR congestion control

🌐 Router Mode

Full router with WAN, proxy and HTTPS frontends.

• WAN protocols: DHCP, Static, PPPoE, L2TP
• NAT/Masquerade with firewall
• Web Proxy: Squid, TinyProxy, Privoxy
• Transparent proxy option
• DNS over HTTPS support
• HTTPS Reverse Proxy: Nginx, HAProxy, Caddy
• Multiple virtual hosts with Let's Encrypt

🛡️ Router + DMZ Mode

Create a dedicated DMZ segment for exposed servers while keeping LAN traffic segregated.

• Separate DMZ interface with its own subnet/DHCP scope
• Firewall zone isolation (DMZ → WAN forwarding, no DMZ → LAN unless toggled)
• Fast rollback using the existing backup/confirm workflow
• Designed for hosting apps (Zigbee2MQTT, Lyrion, etc.) when combined with the VHost manager

✨ Features

• 🎛️ One-click mode switching with backup
• 📊 Real-time interface and service status
• ⚡ Optimized configurations per mode
• 🔐 Secure settings management
• 📱 Responsive design
• 🎨 Modern dark theme

Installation

Prerequisites

• OpenWrt 21.02 or later
• LuCI web interface

From Source

cd ~/openwrt/feeds/luci/applications/
git clone https://github.com/gkerma/luci-app-network-modes.git

cd ~/openwrt
./scripts/feeds update -a && ./scripts/feeds install -a
make menuconfig  # LuCI > Applications > luci-app-network-modes
make package/luci-app-network-modes/compile V=s

Manual Installation

scp luci-app-network-modes_*.ipk root@192.168.1.1:/tmp/
ssh root@192.168.1.1 "opkg install /tmp/luci-app-network-modes_*.ipk"
/etc/init.d/rpcd restart

Access

Network → Network Modes

Mode-Specific Dependencies

Sniffer Mode

opkg install netifyd

Access Point Mode

opkg install hostapd-openssl  # For WPA3/802.11r

Relay Mode

opkg install relayd wireguard-tools

Router Mode

# Proxy
opkg install squid  # or tinyproxy, privoxy

# Reverse Proxy
opkg install nginx-ssl  # or haproxy

# Let's Encrypt
opkg install acme acme-dnsapi

Architecture

┌─────────────────────────────────────────────────────────┐
│                    LuCI JavaScript                       │
│  (overview.js, sniffer.js, accesspoint.js, relay.js,    │
│                      router.js)                          │
└───────────────────────────┬─────────────────────────────┘
                            │ ubus RPC
                            ▼
┌─────────────────────────────────────────────────────────┐
│                    RPCD Backend                          │
│             /usr/libexec/rpcd/network-modes             │
└───────────────────────────┬─────────────────────────────┘
                            │ UCI / Shell
                            ▼
┌─────────────────────────────────────────────────────────┐
│              OpenWrt Configuration                       │
│     /etc/config/network, wireless, firewall, dhcp       │
└─────────────────────────────────────────────────────────┘

API Methods

Method	Description
status	Current mode, interfaces, services status
modes	List all modes with configurations
sniffer_config	Sniffer mode settings
ap_config	Access Point mode settings
relay_config	Relay mode settings
router_config	Router mode settings
apply_mode	Switch to a different mode
update_settings	Update mode-specific settings
add_vhost	Add virtual host (router mode)
generate_config	Generate config preview

Configuration File

Settings are stored in /etc/config/network-modes:

config network-modes 'config'
    option current_mode 'router'
    option last_change '2024-12-19 15:30:00'
    option backup_config '1'

config mode 'sniffer'
    option mode_type 'bridge'  # 'bridge' or 'passive'
    option bridge_interface 'br-lan'
    option monitor_interface 'eth0'  # For passive mode
    option netifyd_enabled '1'
    option promiscuous '1'
    option pcap_capture '0'
    option pcap_path '/tmp/captures'
    option mirror_port ''
    option capture_filter ''
    option span_port_source ''  # For passive mode with SPAN

config mode 'accesspoint'
    option wifi_channel 'auto'
    option wifi_htmode 'VHT80'
    option wifi_txpower '20'
    option roaming_enabled '1'

config mode 'relay'
    option wireguard_enabled '1'
    option mtu_optimization '1'
    option mss_clamping '1'

config mode 'router'
    option wan_protocol 'dhcp'
    option nat_enabled '1'
    option firewall_enabled '1'
    option proxy_enabled '0'
    option https_frontend '0'

Sniffer Mode Examples

Basic Sniffer Bridge Setup (Inline)

1. Enable Sniffer Bridge Mode via LuCI:

   • Navigate to Network → Network Modes
   • Select Sniffer Bridge Mode (Inline)
   • Enable Netifyd Integration
   • Click Apply Mode

2. Physical Connection:

   Modem/ISP → [WAN] OpenWrt [LAN1-4] → Switch/Devices
   

3. Verify Configuration:

   # Check bridge status
   brctl show br-lan
   
   # Verify no IP on bridge
   ip addr show br-lan
   
   # Check promiscuous mode
   ip link show br-lan | grep PROMISC
   
   # Verify Netifyd is running
   /etc/init.d/netifyd status
   

---

Passive Sniffer Setup (Out-of-band)

Option A: Using Switch SPAN Port

1. Configure Switch SPAN/Mirror Port:

   • Access your managed switch configuration
   • Configure port mirroring:
     • Source ports: Ports to monitor (e.g., uplink port)
     • Destination port: Port connected to OpenWrt (e.g., port 24)
     • Direction: Both (ingress + egress)

2. Configure OpenWrt Passive Mode:

   # Via UCI
   uci set network-modes.sniffer.mode_type='passive'
   uci set network-modes.sniffer.monitor_interface='eth0'
   uci set network-modes.sniffer.netifyd_enabled='1'
   uci commit network-modes
   
   # Apply configuration
   ubus call network-modes apply_mode '{"mode":"sniffer"}'
   

3. Configure Monitor Interface:

   # Remove IP from monitoring interface
   ip addr flush dev eth0
   
   # Enable promiscuous mode
   ip link set eth0 promisc on
   
   # Bring interface up
   ip link set eth0 up
   
   # Verify interface state
   ip link show eth0
   

4. Start Netifyd on Monitor Interface:

   # Edit /etc/netifyd.conf
   {
     "interfaces": {
       "internal": [],
       "external": ["eth0"]
     },
     "enable_sink": true
   }
   
   # Restart Netifyd
   /etc/init.d/netifyd restart
   

5. Verify Passive Capture:

   # Test with tcpdump
   tcpdump -i eth0 -c 100
   
   # Check Netifyd is seeing traffic
   ubus call luci.netifyd status
   
   # Monitor live flows
   ubus call luci.netifyd flows | jq '.flows | length'
   

Option B: Using Network TAP

1. Physical Setup:

   Router [eth0] ──→ [TAP IN]
                         ↓
                    [TAP MONITOR] ──→ OpenWrt [eth0]
                         ↓
                     [TAP OUT] ──→ Switch
   

2. Configure OpenWrt:

   # Same as SPAN port configuration above
   uci set network-modes.sniffer.mode_type='passive'
   uci set network-modes.sniffer.monitor_interface='eth0'
   uci commit network-modes
   

3. Advantages of TAP:

   • ✅ Hardware-based, zero packet loss
   • ✅ Full duplex monitoring (both directions)
   • ✅ No switch configuration needed
   • ✅ Cannot be remotely disabled
   • ⚠️ Requires physical TAP device

Option C: Using Hub (Budget Option)

1. Physical Setup:

   Router ──→ [Hub Port 1]
               [Hub Port 2] ──→ Switch
               [Hub Port 3] ──→ OpenWrt [eth0]
   

2. Configure OpenWrt:

   # Same passive configuration
   uci set network-modes.sniffer.mode_type='passive'
   uci set network-modes.sniffer.monitor_interface='eth0'
   uci commit network-modes
   

3. Limitations:

   • ⚠️ Only works with 10/100Mbps networks
   • ⚠️ Half-duplex only
   • ⚠️ Adds latency
   • ⚠️ Not recommended for modern networks

Advanced Capture Configuration

Capture HTTP traffic to PCAP:

# Via UCI
uci set network-modes.sniffer.pcap_capture='1'
uci set network-modes.sniffer.pcap_path='/mnt/usb/captures'
uci set network-modes.sniffer.capture_filter='port 80 or port 443'
uci commit network-modes

# Manual tcpdump
tcpdump -i br-lan -w /tmp/capture.pcap port 80 or port 443

Monitor specific applications:

# Watch Netflix traffic
tcpdump -i br-lan -n 'host nflxvideo.net or host netflix.com'

# Monitor DNS queries
tcpdump -i br-lan -n 'port 53'

# Capture BitTorrent
tcpdump -i br-lan -n 'port 6881:6889'

Real-time bandwidth per IP:

# Using iftop
iftop -i br-lan -P

# Using nethogs (if installed)
nethogs br-lan

# Using Netifyd API
ubus call luci.netifyd flows | jq '.flows[] | select(.bytes_total > 1000000)'

Integration Examples

Export to Elasticsearch:

# Netifyd can export to Elasticsearch for centralized logging
# Configure in /etc/netifyd.conf
{
  "sink": {
    "type": "elasticsearch",
    "url": "http://elastic.local:9200",
    "index": "netifyd"
  }
}

Feed data to Grafana:

# Netifyd exports Prometheus metrics
curl http://192.168.1.1:8081/metrics

Integrate with CrowdSec:

# CrowdSec can parse Netifyd logs for threat detection
# Configure in /etc/crowdsec/acquis.yaml
filenames:
  - /var/log/netifyd.log
labels:
  type: netifyd

Performance Tuning

Optimize for high-bandwidth networks (1Gbps+):

# Increase ring buffer size
ethtool -G eth0 rx 4096 tx 4096
ethtool -G eth1 rx 4096 tx 4096

# Disable hardware offloading for accurate capture
ethtool -K eth0 gro off gso off tso off
ethtool -K eth1 gro off gso off tso off

# Set bridge to forwarding mode
echo 1 > /proc/sys/net/bridge/bridge-nf-call-iptables

USB Storage for PCAP captures:

# Mount USB drive
mkdir -p /mnt/usb
mount /dev/sda1 /mnt/usb

# Configure rotation
uci set network-modes.sniffer.pcap_path='/mnt/usb/captures'
uci set network-modes.sniffer.pcap_rotation='daily'
uci set network-modes.sniffer.pcap_retention='7'
uci commit network-modes

Troubleshooting

No traffic visible:

# Verify bridge members
brctl show

# Check interface states
ip link show

# Test with tcpdump
tcpdump -i br-lan -c 10

# Check Netifyd logs
logread | grep netifyd

High CPU usage:

# Disable DPI if not needed
uci set network-modes.sniffer.netifyd_enabled='0'

# Reduce capture scope with filters
tcpdump -i br-lan 'not port 22' -w /dev/null

# Check for hardware offloading
ethtool -k eth0 | grep offload

Security

• Mode switching creates automatic backups
• Private keys never exposed via API
• ACL-based access control
• Firewall auto-configuration

Screenshots

Overview

Access Point Settings

Router with Virtual Hosts

Contributing

Contributions welcome! Please submit issues and pull requests.

License

Apache License 2.0 - See LICENSE

Credits

• Built for OpenWrt
• Developed by Gandalf @ CyberMind.fr

---

Made with ⚙️ for flexible networking